BYSLV - AA235,MOLYBDENUM AA STANDARD

  • MSDS: BYSLV
  • Manufacturer: SPECTRUM CHEMICAL MFG CORP
  • Product Name: AA235,MOLYBDENUM AA STANDARD
  • National Stock Number: 6810-00D004680
Product Identification

Product ID:AA235,MOLYBDENUM AA STANDARD
MSDS Date:10/13/1995
FSC:6810
NIIN:00D004680
MSDS Number: BYSLV

Responsible Party
SPECTRUM CHEMICAL MFG CORP.
14422 S. SAN PEDRO ST
GARDENA, CA 90248
US

Emergency Phone: 310-516-8000,800-424-9300(CHEMTREC)

Info Phone: 310-516-8000

Preparer: E. BRULL

Cage: 63415

Contractor
SPECTRUM LABORATORY PRODUCTS INC
GARDENA, CA 90248-2027 US

Telephone: 310-516-9843

Cage: 63415

Ingredients

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 0.1-1.0%

OSHA PEL 10 PPM.

ACGIH TLV: 10 PPM.


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 99.9%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NO SPECIFIC INFORMATION IS
AVAILABLE IN MANUFACTURER'S DATABASE REGARDING THE TOXIC EFFECTS OF
THIS MATERIAL FOR HUMANS. HOWEVER, MATERIAL IS VERY SLIGHTLY TO
SLIGHTLY DANGEROUS IN CASE OF SKIN CONTACT (IRRITANT), OF EYE
CONTACT (IRRITANT), OF INHALATION. SLIGHTLY DANGEROUS TO DANGEROUS
IN CASE OF INGESTION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. SKIN: IRRITATION. INHALATION:
IRRITATION. INGESTION: NO SPECIFIC INFORMATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. SKIN: REMOVE
CONTAMINATED CLOTHING. WASH AREA WITH SOAP AND WATER. IF IRRITATION
DEVELOPS, GET MEDICAL ATTENTION. INHALATION: MOVE TO FRESH AIR.
SUPPORT BREATH ING AS NECESSARY. GET MEDICAL ATTENTIONIF NEEDED.
INGESTION: REMOVE DENTURES IF ANY. DRINK SEVERAL GLASSES OF WATER
OR MILK. INDUCE VOMITING. GET MEDICAL ATTENTION.

Fire Fighting

Flash Point:NON-FLAMMABLE
Extinguishing Media:NON-FLAMMABLE. USE MEDIA APPROPRIATE FOR
SURROUNDING FIRE.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:NO SPECIFIC INFORMATION IS AVAILABLE IN
MANUFACTURER'S DATABASE REGARDING THE PRODUCT'S RISKS OF EXPLOSION
IN THE PRESENCE OF VARIOUS MATERIALS.

Accidental Release

Spill Release Procedures:DILUTE SPILL WITH WATER, MOP UP OR ABSORB WITH
INERT DRY MATERIAL. PLACE IN APPROPRIATE DISPOSAL CONTAINER. FINISH
CLEANING BY SPREADING WATER ON THE CONTAMINATED SURFACE AND ALLOW
TO EVACUATE THROUGH THE SANITARY SYSTEM.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NO SPECIFIC STORAGE IS REQUIRED. USE
SHELVES OR CABINETS STURDY ENOUGH TO BEAR THE WEIGHT OF THE
CHEMICALS.
Other Precautions:BE SURE THAT IT IS NOT NECESSARY TO STRAIN TO REACH
MATERIALS, AND THAT SHELVES ARE NOT OVERLOADED.

Exposure Controls

Respiratory Protection:NONE NORMALLY REQUIRED. WEAR APPROPRIATE
MASH/NIOSH APPROVED VAPOR RESPIRATOR OR EQUIVALENT WHEN VENTILATION
IS INADEQUATE.
Ventilation:PROVIDE EXHAUST VENTILATION OR OTHER ENGINEERING CONTROLS
TO KEEP AIRBORNE VAPOR CONCENTRATIONS BELOW RESPECTIVE TLV'S.
Protective Gloves:GLOVES ARE RECOMMENDED.
Eye Protection:SAFETY GLASSES RECOMMENDED.
Other Protective Equipment:LAB COAT RECOMMENDED.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSING.
Supplemental Safety and Health
SUGGESTED CLOTHING MIGHT NOT BE SUFFICIENT; CONSULT SPECIALIST BEFORE
HANDLING PRODUCT. MATERIAL IS NON-CORROSIVE TO GLASS.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:17.535
Vapor Density:0.62
Spec Gravity:1.01
Solubility in Water:COMPLETE
Appearance and Odor:LIQUID. ODOR NOT AVAILABLE.

Stability

Stability Indicator/Materials to Avoid:YES
NO INFORMATION AVAILABLE IN MANUFACTURER'S DATABASE REGARDING
REACTIVITY OF THIS MATERIAL WITH VARIOUS OTHER MATERIALS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:CONSULT YOUR LOCAL OR REGIONAL AUTHORITIES.
DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS. RECYCLE TO PROCESS, IF POSSIBLE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.